Division 08 Estimators
Commercial Glass & Storefront Estimating
More estimating capacity. Better scope control. More bids out the door.
CCFE provides U.S.-based estimating support for commercial glass, glazing, storefront and aluminum entrance contractors. From storefront elevations and glass schedules to entrance systems, glazing requirements, hardware coordination and addenda, our estimators work through the documents to determine what is actually required before the project reaches your bid.
U.S.-Based Estimators | Commercial Glass & Glazing | Storefront & Entrances | Pre-Construction Intelligence
Section Two
The Pre-Construction Intelligence Partner for Commercial Glass & Glazing.
Glass bids are not lost on square footage alone.
They are lost in the details.
Glazing estimates can be affected by conditions buried across the documents — not just the glass quantities on a schedule.
This is why CCFE approaches glazing estimating as pre-construction intelligence — not a takeoff line item.
What We Estimate.
Storefront & Aluminum Framing
Exterior storefront
Interior storefront
Aluminum-framed entrances
Storefront door framing
Heads
Sills
Jambs
Intermediate verticals
Horizontals
Transoms
Sidelites
Thermal systems
Non-thermal systems
Front-set glazing
Center-set glazing
Back-set glazing
Subsills where specified
Framing accessories
Finishes
Perimeter conditions
Commercial Glass & Glazing
Monolithic glass
Insulating glass units
Tempered glass
Heat-strengthened glass
Laminated glass
Tinted glass
Low-E glass
Reflective glass
Spandrel glass
Decorative and obscure glass
Interior glazing
Safety glazing
Impact glazing
Security glazing
Specialty glazing when specified
Gaskets
Setting blocks
Glazing accessories
Sealants when included in the glazing scope
Aluminum Entrances & Storefront Doors
Single entrances
Paired entrances
Narrow-stile entrances
Medium-stile entrances
Wide-stile entrances
Transoms
Sidelites
Entrance framing
Door glass
Thresholds
Closers
Panic devices
Pivots and hinges
Pulls
Locks
Exit devices
Weathering components
Entrance accessories
Hardware responsibility is determined from the construction documents. Complete Division 08 hardware packages are not automatically included.
Interior Glass
Where specifically part of the contractor's bid:
Interior glass partitions
Office fronts
Conference room glazing
Interior storefront
Sidelites
Borrowed lites
Interior entrance assemblies
All-glass applications
Mirrors and specialty interior glass when included
We Don't Just Count Glass.
We Reconcile the Opening.
Storefront information can appear across multiple areas of the documents. Reconciling those sources is what separates a quantity from an estimate.
Floor plans
Exterior elevations
Interior elevations
Enlarged storefront elevations
Door schedules
Window schedules
Glass schedules
Finish schedules
Hardware sets
Wall sections
Head details
Jamb details
Sill details
Specifications
Alternates
Addenda
Bulletins
Product requirements
Security requirements
Energy requirements
Estimating Built Around the Way Glazing Contractors Bid.
Projects can be organized around what matters to the contractor — not forced into a one-size template.
Document Intelligence Before the Bid.
Drawing/specification contradictions
Missing glass designations
Conflicting glass types
Missing storefront elevations
Unclear framing systems
Thermal vs. non-thermal requirements
Finish conflicts
Entrance hardware responsibility
Missing entrance information
Safety glazing requirements
Security requirements
Impact glazing
Fire-rated glazing requirements
Specialty glazing
Perimeter sealant responsibility
Alternates
Addenda
Scope shown outside the primary glazing sheets
Details conflicting with elevations
Requirements appearing only in the specifications
Know what is in the number before the number becomes a contract.
Built for Commercial Glazing Contractors.
Commercial glazing contractors
Glass contractors
Storefront contractors
Architectural aluminum contractors
Regional glazing companies
National glazing providers
Specialty subcontractors
Contractors entering new markets
Contractors needing overflow estimating
Contractors needing supplemental estimating capacity
When Do You Call CCFE?
Need another glass estimator?
Call CCFE.
Have more bids than your estimating department can handle?
Call CCFE.
Expanding into another market?
Call CCFE.
Storefront elevations are a mess?
Call CCFE.
Need an independent review before the bid goes out?
Call CCFE.
Your estimator is buried and three more projects just arrived?
Call CCFE.
We become additional estimating capacity when you need it.
The Process.
Send the Project
Provide available drawings, specifications, addenda and bid requirements.
Define the Glass & Storefront Scope
Review documents and establish the applicable commercial glazing scope.
Estimate the Project
Quantify storefront, glass, entrances and related documented scope.
Review the Documents
Identify contradictions, missing information and unclear scope affecting the estimate.
Return the Project
Return organized estimating information for the contractor's bid process.
Important Distinction
Storefront Is Not Curtain Wall.
Storefront systems are generally associated with lower-rise, single-span applications. Curtain wall and other engineered façade systems can have substantially different structural, thermal, drainage, fabrication and installation requirements.
The standard CCFE Commercial Glass & Storefront service does not automatically assume curtain wall is included. Curtain wall and complex façade systems should be reviewed and scoped separately based on project complexity.
Project-Specific Systems Requiring Separate Review
Complex systems deserve a complex-system review, not a storefront assumption.
Project Types.
Retail
Restaurants
Office
Corporate Interiors
Healthcare
Education
Hospitality
Automotive
Mixed-Use
Tenant Improvements
Municipal
Government
Industrial
Warehousing
Multi-Family Common Areas
National Account Programs
Why CCFE.
U.S.-Based Estimating
Estimators seated in the United States with commercial construction experience.
Built for Overflow
Additional estimating capacity when bid volume exceeds internal resources.
Document-Driven
Estimates built from the construction documents — not from assumptions.
Scope-Focused
Commercial glass, glazing, storefront and aluminum entrances — not every trade.
Private Project Handling
Project documents are not intentionally submitted to public AI systems for open processing.
Frequently Asked Questions.
Division 08 Estimators
Your Next Bid Doesn't Need to Wait for Another Estimator to Become Available.
Add estimating capacity when the workload demands it.
Commercial Glass. Storefront. Aluminum Entrances. Pre-Construction Intelligence.
View PricingProject Submission
Send Us a Project.
Send the project documents and basic bid information. We will review the scope and respond regarding capacity and scheduling.